Anyone who has lived in La Porte, Seabrook or Baytown knows the air here can feel like a wet towel for much of the year. That humidity doesn’t just affect your comfort. It affects your house, and it should affect how you remodel.
Materials and methods that work fine in a dry climate can lead to swelling, warping, peeling paint and mold here. This post covers what we think about when we remodel in the Houston Bay Area, and what you should ask about on your own project.
Why Humidity Matters in Remodeling
Moisture gets into homes in a few main ways:
- Humid outdoor air getting inside through gaps, leaks and poorly sealed openings
- Indoor moisture from showers, cooking and laundry
- Water leaks from plumbing, roofs, windows and doors
- Storm and flood water
- Condensation on cold surfaces such as AC ducts, supply vents and pipes
When moisture sticks around, it can feed mold, rot wood and damage finishes. The goal of a good remodel is to keep water out, let any moisture that does get in dry out, and choose materials that can handle the conditions.
What We Often Find During Demolition
When we open up walls and floors in older Bay Area homes, it’s common to find:
- Water damage under sinks and around toilets
- Mold behind shower walls with failed waterproofing
- Rotted wood around windows and exterior doors
- Damage from past storms that was covered over rather than repaired
If we find any of this, we show the homeowner and handle the repair through a written change order. Covering up damage only makes the problem bigger later.
Note on mold: In Texas, mold assessment and remediation are regulated by the Texas Department of Licensing and Regulation (TDLR), which took over the program from DSHS in 2017. In general, if visible mold covers 25 contiguous square feet or more, the assessment and cleanup must be done by TDLR-licensed mold professionals, and the same company can’t do both the assessment and the remediation on one project. Smaller areas can usually be cleaned up by people who aren’t licensed. There are exemptions, including some owners working on their own property.
Bathrooms: Waterproofing and Ventilation
Bathrooms take the most moisture abuse in a home.
- Waterproofing: A shower needs a proper waterproofing system behind the tile, not just tile and grout. Grout isn’t waterproof.
- Backer board: Use cement board or foam board rated for wet areas, not regular drywall, in showers.
- Exhaust fan: It should be sized for the room and vented outside, not into the attic. A fan that dumps moist air into the attic just moves the problem.
- Moisture-resistant drywall in the rest of the bathroom, and paint made for bathrooms.
Kitchens: Leaks and Cabinet Choices
- Sink base cabinets are the most likely to get wet. Ask about cabinet box materials and finishes that hold up better to moisture.
- Range hoods should vent outdoors where possible, to remove both moisture and cooking byproducts.
- Water shutoff valves and supply lines should be in good shape. Replacing old supply lines during a remodel is inexpensive insurance.
- Leak detectors under the sink and behind the dishwasher or refrigerator can catch small problems early.
Flooring Choices for Humid Homes
- Tile and luxury vinyl plank generally handle moisture well. Check that a vinyl product is rated for your use.
- Solid hardwood can expand and contract with humidity changes. Engineered wood is often more stable, but it still needs proper acclimation and installation.
- Carpet in areas prone to moisture can hold onto water and odors.
- On a concrete slab, a moisture test and the right underlayment or vapor barrier matter for many flooring types. Follow the flooring manufacturer’s testing and installation requirements.
Walls, Trim and Exterior Work
- Exterior trim and siding: Fiber cement and PVC trim are often chosen in humid climates because they resist rot better than untreated wood.
- Flashing: Windows and doors need proper flashing to keep water out of the walls. This is one of the most common failure points we see.
- Paint: Use quality exterior paint, and prepare surfaces properly. Paint over damp or rotted wood won’t last.
- Coastal wind requirements: To be eligible for Texas Windstorm Insurance Association (TWIA) coverage, a building inside the designated catastrophe area that was built, altered, remodeled, enlarged or repaired on or after January 1, 1988 needs a certificate of compliance (WPI-8) issued by the Texas Department of Insurance. That usually means roofing, windows, doors and structural work are inspected for windstorm compliance during the job. In Harris County, the area covers only property east of State Highway 146 inside La Porte, Seabrook, Pasadena, Morgan’s Point and Shore Acres. Baytown’s Harris County side is not included, but the part of Baytown east of Cedar Bayou is in Chambers County, and all of Chambers County is included. All of Galveston and Brazoria counties are included too. Since April 1, 2026, TDI certifies this work to the 2024 International Residential or Building Code.
Let Materials Acclimate
Wood flooring, trim, doors and cabinets can absorb moisture. Many manufacturers call for products to sit in the conditioned home for a period before installation. Skipping this step can lead to gaps, cupping or swelling later.
The AC System Matters Too
Your air conditioner removes humidity as well as heat. A remodel is a good time to ask:
- Is the system sized correctly for the space? An oversized unit can cool fast but remove less moisture.
- Are ducts sealed and insulated, especially in the attic?
- Does a new or enlarged space need its own supply and return?
HVAC work in Texas should be done by a state-licensed contractor.
Plan for Storms
Hurricane season on the Gulf Coast typically runs June through November. If your project involves exterior work or a roof, ask your contractor how the site will be secured if a storm approaches.
Frequently Asked Questions
Can I just paint over mold?
No. Painting over mold doesn’t fix the moisture problem that caused it. Find and fix the source first, then remove the damaged material. In Texas, mold covering 25 contiguous square feet or more generally has to be handled by TDLR-licensed mold professionals, with some exemptions.
What’s the most important thing in a humid-climate bathroom remodel?
Proper shower waterproofing and an exhaust fan vented to the outside.
Is luxury vinyl plank good for Houston-area homes?
It’s a popular choice because it handles moisture well, but product quality varies. Check the manufacturer’s ratings and installation requirements.
Remodel for the Climate You Live In
Green Dynasty Construction builds and remodels with Gulf Coast humidity in mind for homeowners and businesses in La Porte, Deer Park, Pasadena, Baytown, Seabrook, League City and Houston. If you have a project coming up, or you’re worried about moisture in an older space, call 832-304-0636. We’re based in La Porte, TX.